Description
The PLGW lifting point has been developed and manufactured according to the very latest standards.
This lifting point can be very simply tightened by hand and then aligned in the load direction – a system that is ideally suited for frequent assembly / disassembly applications. However, if the lifting point is to be utilised in a more permanent application and / or is subject to vibrations during use, the torque settings in the load table must be observed.
This patented system has proven itself from the beginning and promises unsurpassed ease of use.
The eyebolt is 360° rotatable, comes with an interchangeable special screw that is 100% crack tested and finished with a chrome VI free corrosion protection.
Each lifting point is marked with an individual serial number, the load capacity and the thread size. A batch number is also displayed on all load bearing parts such as the eye and screw. All of these factors make identification and traceability for mandatory regular inspections easier than ever.
The PLGW ‘Supreme’ range is available with metric or UNC thread options and can also be supplied with long (max.) or custom bolt lengths in metric form which are supplied with a special 100% crack detected prevailing torque type locking nut and washer to DIN 980-V (PLMS).
Metric thread sizes available: M8, M10, M12, M16, M20, M24, M30, M36, M42, M48.
UNC thread sizes available (Supreme version only): 3/8″, 1/2″, 5/8″, 3/4″, 1″, 1 1/4″, 1 1/2″, 1 3/4″.
